Environment: solaris 10 with two disks, c1t0d0 and c1t1d0, c1t0d0 is original / file system, c1t0d0 is new attached disk. now we try to make c1t0d0 and c1t1d0 as Raid1 root mirror.
be care that: for SVM volume, there must be a free slice in each disk to contain meta db. in this environment, slice s6 with 170M space is used for this.
1. fdisk new disk c1t0d0 to create solaris patition.
2. copy the original volume table to the second disk:
bash-3.00# prtvtoc /dev/rdsk/c1t0d0s2 | fmthard -s - /dev/rdsk/c1t1d0s2
fmthard: New volume table of contents now in place.
3. create meta db for the two disks:
bash-3.00# metadb -af -c 3 /dev/dsk/c1t0d0s6 /dev/dsk/c1t1d0s6
4. create meta devices. Remember at this time, just attach one way mirror, the left half will be attached after rebooting:
bash-3.00# metainit -f d11 1 1 /dev/dsk/c1t0d0s0
d11: Concat/Stripe is setup
bash-3.00# metainit -f d21 1 1 /dev/dsk/c1t1d0s0
d21: Concat/Stripe is setup
bash-3.00# metainit -f d12 1 1 /dev/dsk/c1t0d0s1
d12: Concat/Stripe is setup
bash-3.00# metainit -f d22 1 1 /dev/dsk/c1t1d0s1
d22: Concat/Stripe is setup
bash-3.00# metainit -f d13 1 1 /dev/dsk/c1t0d0s7
d13: Concat/Stripe is setup
bash-3.00# metainit -f d23 1 1 /dev/dsk/c1t1d0s7
d23: Concat/Stripe is setup
bash-3.00# metainit -f d1 -m d11
d1: Mirror is setup
bash-3.00# metainit -f d2 -m d12
d2: Mirror is setup
bash-3.00# metainit -f d3 -m d13
d3: Mirror is setup
5. use metaroot to modify vfstab, also manually modify vfstab to use new created meta devices:
bash-3.00# metaroot d1
bash-3.00# vi /etc/vfstab
"/etc/vfstab" 13 lines, 461 characters
#device device mount FS fsck mount mount
#to mount to fsck point type pass at boot options
#
fd - /dev/fd fd - no -
/proc - /proc proc - no -
/dev/md/dsk/d2 - - swap - no -
/dev/md/dsk/d1 /dev/md/rdsk/d1 / ufs 1 no -
/dev/md/dsk/d3 /dev/md/rdsk/d3 /export/home ufs 2 yes -
/devices - /devices devfs - no -
sharefs - /etc/dfs/sharetab sharefs - no -
ctfs - /system/contract ctfs - no -
objfs - /system/object objfs - no -
swap - /tmp tmpfs - yes -
~
"/etc/vfstab" 13 lines, 452 characters
6. lock file system for sync, then reboot:
bash-3.00# lockfs -fa
bash-3.00# init 6
7. after reboot, now we may attach the left half to the mirror. the metattach command may return soon, but the really sync work may take a long time depend on the size of the underlying file system.
bash-3.00# metattach d1 d21
d1: submirror d21 is attached
bash-3.00# metattach d2 d22
d2: submirror d22 is attached
bash-3.00# metattach d3 d23
d3: submirror d23 is attached
bash-3.00#
8. use “metastat –i” to check each sub mirror sync status until all are stated as “Ok”, such as:
d11: Submirror of d1
State: Okay
9. install grub boot sector(if in Sparc, use installboot instead):
bash-3.00# installgrub -fm /boot/grub/stage1 /boot/grub/stage2 /dev/rdsk/c1t0d0s0
stage1 written to partition 0 sector 0 (abs 4096)
stage2 written to partition 0, 265 sectors starting at 50 (abs 4146)
stage1 written to master boot sector
bash-3.00#
10. Now you may boot from both hd0 and hd1 to test if the mirror is working well, manually modify the grub menu.lst to use “root (hd0,0,a)” and “root(hd1,0,a)” to test, do not use the “findroot(rootfs0,0,a)” item, since the findroot command need an entry under /boot/grub, we directly define hd0 and hd1 will be more easy to test.
11. in many documents, there is boot-device and altbootpath paramenter needed, they may be define by eeprom command. but in my test, you may switch the boot disk in bios and this is not absolutely needed. if you want this, just check some other doc for this, the command is like following, it’s actually stored at /boot/solaris/bootenv.rc
bash-3.00# eeprom altbootpath=/pci@0,0/pci15ad,1976@10/sd@1,0:a
12. now everything is ok. you may destroy one of your root disk and try to boot from another disk. select in grub list, edit the boot line to set it correct:
root(hd0,0,a) or
root(hd1,0,a)
Full Text
